Groundwater Pumps & Low Flow Sample Equipment

QED Sample Pro – Low Flow Sample Pump

The Sample Pro Portable MicroPurge Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites where groundwater samples are collected from many monitioring wells with the same pump. The Sample Pro Pump is easy to disassemble, without any tools, and simple to clean to eliminate any potential cross contamination. That includes the exclusive SamplePro disposble bladder, which snaps in and out without any clamps, so they can be discarded after each well is sampled.

The SamplePro pump is available in two diameters: 1.75" (4.45cm) to fit in 2" (50mm) monitoring wells or larger; and 3/4" (1.91 cm) to fit small diameter wells and direct-push boreholes. Both pump models are capable of pumping from depths up to 200 feet (61m).

A HotZone Exclusive Offer!!! - Complete Low Flow Kit Special Pricing

• QED Low Flow Sample Pro Pump (1.75" or 3/4")
• MP10 Low Flow Controller
• Well Wizard Compressor
• YSI556 MPS with Flow Cell
  

Click here for Low Flow Sampling Supplies.

Product Details

• Designed to bring the advantages of low-flow sampling to sites where samples are taken with portable pumps.
• Exclusive twist-apart design makes it easy to pull-off the disposable bladder between wells. No tools required.
• Available in two sizes; 1.75" (44.5mm) SamplePro for 2" (50mm) monitoring wells, or larger, and 0.75" for 3/4" (19mm) monitoring wells or direct-push applications.
  

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.qedenv.com

QED MP 10 - Low Flow Controller

The MicroPurge® MP10 Controller revolutionizes low-flow ground water sampling with advanced logic control of purge flow and well drawdown. Simple up-down arrow keys increase and decrease purge flow to meet low-flow requirements. Once optimized, settings can be easily recalled in the next round of sampling.

The lightweight, compact MP10 “leads the field” with genuine MicroPurge low-flow groundwater sampling equipment, the most complete line of equipment for low-flow sampling.

QED's MicroPurge sampling equipment is lighter and more portable, and increases sampling crew productivity. Simplified, sealed electronics are put together in a design that delivers famous QED long term durability and value under true field use conditions.

Click here for Low Flow Sampling Supplies.

Product Details

Microprocessor-based advanced logic for precise and accurate flow adjustment.

• Simple up/down arrow keys adjust flow rates with digital precision, with manual on/off control for sample collection.
• Automatic drawdown control when connected to MP30 Drawdown Meter.
• Compact, rugged, lightweight; allows easy recall of optimized settings for next sampling round.
• Dimensions:10-3/4"x9-3/4"x5" (27x25x13 cm); Weight: 5.5 lb. (2.5 kg); Max. Pressure: 120 PSI (8,275 kPa); Max. Pump Depth: 250 feet (76 m); Power: 3 "AA" batteries.

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.qedenv.com

QED Well Wizard - DC Powered Air Compressor

QED's 15 pound, proven 3020 DC Powered Electric Compressor is a convenient, reliable air source. The 12 volt DC compressor can even be powered by your vehicle's battery.  The units is equipped with battery clamp connectors.

Click here to link to Low Flow Sampling Supplies.

Product Details

• Model 3020 Electric 12 VDC Compressor is a lightweight (15 lb.), low-output air source.
• Battery clamp style connectors for quick connection to a car battery or portable battery.
• 100 psi maximum pressure with a 100 ft maximum recommended lift.

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.qedenv.com

Perstaltic Pump - Solinst Model 410

The Model 410 Peristaltic Pump operates to the suction lift limit, allowing vacuum pumping or pressure delivery of liquids or gases. It is ideal for sample removal from shallow wells and surface water. The Solinst Peristaltic Pump has a variable pumping rate and uses either 3/8" or 5/8" silicon tubing.

It uses any 12 volt external DC supply and can deliver from 10 ml/min. in sample mode to as much as 3 liters/min. in the purge mode. The pump is very compact and easy to use, with a handle and easy-access controls on the top of the pump. The metal case is robust, water resistant and has no grates or openings

Click here to link toTubing.

Product Details

• Oversized power clips for use with automotive batteries.
• Designed for long battery life.
• ON/OFF switch has a reverse polarity protection feature.
• The Direction switch shows the direction of flow.
• The SPEED control allows pump rate adjustment.

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.solinst.com

Purge & Sample Pump – Stainless Steel Monsoon

The SS-Monsoon is capable of pumping up to 120 feet from ground level to water level and also can be used for low flow sampling. Simply, connect the pump connector to the Low Flow with Power Booster 2 “LCD” Controller, then to a 12 volt battery, energizing the pump.

Click here to link toTubing.

Product Details

• Simple to use! Runs off a 12 volt DC car battery or the ProActive mobile battery power packs.
• Lifts up to 120 feet deep from ground level to water level!
• Reliable design is suitable for continuous sampling or purging of groundwater wells.
• Low Flow Sample as low as 10 ML per minute, from any depth, when using the Low Flow with Power Booster 2 “LCD” Controller.
• Easy to read, glow in the dark LCD display conveniently placed on top of the Low Flow with Power Booster 2 “LCD” Controller makes adjusting and reading the discharge rate a breeze!
• Computer engineered bottom debris filter screen minimizes passing sand, small rocks and debris, reducing clogging or damaging the pump motor!
• Long lasting, high performance pump motor lasts over 500 hours under normal working conditions.
• Simple to clean and decontaminate!
• The SS-Monsoon is only 1.82" OD and constructed of three high polished stainless steel parts:

1. The replaceable motor module
2. The motor housing top connector
3. The outside pump housing

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.gopronow.biz

Development Pump – Proactive Super Twister

PUMPS SAND AND SILT!!! The Super Twister 12 volt pump  is capable of pumping up to 85 feet from at an amazing 1.0 gallon per minute from ground level by simply connecting the pump to a 12 volt battery. This Revolutionary 3 stage pump has a constant voltage booster (CVB) built into the pump. The (CVB) outputs a constant voltage to the Super Twister Pump motors which reduces voltage drop due to battery drainage. This means a more continuous and faster discharge rate! The Super Twister reliable design is suitable for continuous sampling or purging of groundwater wells.  The Super Twister is not designed for use with the Low Flow Sampling Controller.

Click here to link toTubing.

Product Details

• The Super Twister can pass sand, small rocks and debris without getting clogged or damaging the pump motors!
• The Super Twister can run continuously without the need for a cool down!
• The Super Twister can also run dry for up to two hours without motor damage!
• The Super Twister has a long lasting 400 hour motor life!
• The Super Twister's (CVB) incorporates a Reverse Polarity Protection fuse.  It has sleek outside that minimizes well hang-ups.
• The Super Twister is a very reliable and economical pump that provides a great bang
  for your buck!
• The Super Twister comes ready for field use; with 90 feet of heavy duty wire and alligator battery clamps and it is shipped in its own box.

Specifications Sheet Download

Operators Manual Download

Manufacturer’s Site: www.gopronow.biz